Isolation amplifiers

NAMUR isolating amplifier, 1-channel change-over contact or 2-channel NO contact, Input signal: < 1.2 mA blocking/> 2.1 mA conducting, Output signal: relay contact, Switching voltage/switching current maximum: 250 V DC/2A, Connection: screw terminals or push-in terminals, Supply voltage: 24 V DC, Configuration: DIP switch, Mounting: DIN 35 rail

Isolation amplifiers, Calibrated measuring range switching, Input signal current: ±0,3 mA; 0-0,3 mA; ±1 mA; 0-1 mA; ±5 mA; 0-5 mA; ±10 mA; 0-10 mA; 2-10 mA; ±20 mA; 0-20 mA; 4-20 mA; ±50 mA; 0-50 mA; ±100 mA; 0-100 mA, Input signal voltage: ±60 mV; 0-60 mV; ±100 mV; 0-100 mV; ±150 mV; 0-150 mV; ±300 mV; 0-300 mV; ±500 mV; 0-500 mV; ±1 V; 0-1 V; ±5 V; 0-5 V; 1-5 V; ±10 V; 0-10 V; 2-10 V; ±100 V; 0-100 V; ±200 V; 0-200 V, Output signal current: ±10 mA; 0-10 mA; 2-10 mA; ±20 mA; 0-20 mA; 4-20 mA, Output signal voltage: ± 5 V; 0-5 V; 1-5 V; ± 10 V; 0-10 V, Zero/span adjustment, Analogue uni- and bipolar standard signals, Supply voltage: 24 V DC, Cut-off frequency: 100 Hz/5 kHz (definable), Adjustment: DIP switch, Connection: push-in, Mounting: DIN 35 DIN rail

NAMUR isolating amplifier, 2-channel, normally open contact, input signal: < 1.2 mA blocking/> 2.1 mA conducting, output signal: relay contact (normally open contact), switching voltage/switching current maximum: 250 V DC/2A, connection: screw terminals, supply voltage: 24 V DC, setting: DIP switch, mounting: DIN 35 rail

Isolation amplifier, Calibrated measurement range switching, Input signal current: ±10 mA; 0-10 mA; 2-10 mA, Input signal voltage: ± 5 V; 0-5 V; 1-5 V, Output signal current: ±10 mA; 0-10 mA; 2-10 mA; ±20 mA; 0-20 mA; 4-20 mA, Output signal voltage: ± 5 V; 0-5 V; 1-5 V; ± 10 V; 0-10 V, Zero/Span adjustment, Analogue uni- and bipolar standard signals, Supply voltage: 24 V DC, Max. operating frequency: 100 Hz/5 kHz (configurable), Setting: DIP switch, Connection: Push-in, Mounting: DIN-rail 35 mm

Isolation amplifier: 0-10 V; 2-10 V, Output signal voltage: 0-10 V; 2-10 V, Supply voltage: 24 V DC, Max. operating frequency: 100 Hz, Connection: Push-in, Mounting: DIN-rail 35 mm

Active barrier, transmitter power supply, 2-channel, input signal: 2 x 0/4-20 mA, output signal: 2 x 0/4-20 mA, connection: screw terminals, supply voltage: 24 V DC, interfaces: HART, mounting: DIN 35 rail

Supply isolator, 1-channel, Input signal: 4-20 mA, Output signal: 4-20 mA (active), Operating voltage: 24-230 V AC/24-65 V DC (-15/+10%), Interfaces: HART, Connection: screw terminals, Mounting: DIN 35 rail, ATEX-approved

Supply isolator, 2-channel, Input signal: 2 x 4-20 mA, Output signal: 2 x 4-20 mA (active), Operating voltage: 24-31 V DC (-15/+10%), Interfaces: HART, Connection: screw terminals, Mounting: DIN 35 rail

Output isolating amplifier, 1-channel, input signal: 0/4-20 mA, output signal: 0/4-20 mA, connection: screw terminals, supply voltage: 24 V DC, interfaces: HART, setting: DIP switch/ HART, mounting: DIN 35 rail

Isolating transformer, 1-channel, Input signal: 4-20 mA, Output signal: 4-20 mA (passive), Operating voltage: 15-35 V DC (loop powered), Connection: screw terminals, Mounting: DIN 35 rail

Isolating transformer, 2-channel, Input signal: 2 x 4-20 mA, Output signal: 2 x 4-20 mA (passive), Operating voltage: 15-35 V DC (loop powered), Connection: screw terminals, Mounting: DIN 35 rail

Active barrier, 1-channel, Input signal: 0/4-20 mA (feed/non-feed), Output signal: 0/4-20 mA (active/passive), Supply voltage: 24-230 V AC/DC, Interfaces: HART, Connection: screw terminals, Protection rating: IP20, Mounting: DIN 35 rail

Isolation amplifier, Repeater power supply to SMART transmitters, Calibrated measurement range switching, Input signal current: 0-20 mA; 4-20 mA, Output signal current: 0-20 mA; 4-20 mA, Output signal voltage: 0-5 V; 1-5 V; 0-10 V; 2-10 V, Supply voltage: 24 V DC, Max. operating frequency: 100 Hz, Setting: DIP switch, Connection: Push-in, Mounting: DIN-rail 35 mm

Active barrier as signal doubler, transmitter power supply, analogue signal doubler, input signal: 0/4-20 mA, output signal: 2 x 0/4-20 mA, connection: screw terminals, supply voltage: 24 V DC, interfaces: HART, mounting: DIN 35 rail

Output isolating amplifier, 2-channel, input signal: 2 x 0/4-20 mA, output signal: 2 x 0/4-20 mA, connection: screw terminals, supply voltage: 24 V DC, interfaces: HART, setting: DIP switch/ HART, mounting: DIN 35 rail

Active barrier, transmitter power supply, 1-channel, input signal: 0/4-20 mA, output signal: 0/4-20 mA, protection class: Ex ia, connection: screw terminals, supply voltage: 24 V DC, interfaces: HART, mounting: DIN 35 rail

Active barrier, transmitter power supply, 2-channel, input signal: 2 x 0/4-20 mA, output signal: 2 x 0/4-20 mA, protection class: Ex ia, connection: screw terminals, supply voltage: 24 V DC, interfaces: HART, mounting: DIN 35 rail

Isolation amplifier, Permanently configured, Input signal current: 0-20 mA; 4-20 mA, Output signal current: 0-20 mA; 4-20 mA, Supply voltage: 24 V DC, Max. operating frequency: 100 Hz, Connection: Push-in, Mounting: DIN-rail 35 mm

Isolation amplifier, Calibrated measurement range switching, Input signal current: 0-20 mA; 4-20 mA, Input signal voltage: 0-5 V; 1-5 V; 0-10 V, Output signal current: 0-20 mA; 4-20 mA; 0-10 mA; 2-10 mA, Output signal voltage: 0-5 V; 1-5 V; 0-10 V; 2-10 V, Zero/Span adjustment, Supply voltage: 24 V DC, Max. operating frequency: 100 Hz/5 kHz (configurable), Setting: DIP switch, Connection: Push-in, Mounting: DIN-rail 35 mm

Output isolating amplifier, 1-channel, input signal: 0/4-20 mA, output signal: 0/4-20 mA, connection: screw terminals, supply voltage: 24 V DC, interfaces: HART, setting: DIP switch/ HART, mounting: DIN rail DIN 35

Output isolating amplifier, 2-channel, input signal: 2 x 0/4-20 mA, output signal: 2 x 0/4-20 mA, connection: screw terminals, supply voltage: 24 V DC, interfaces: HART, setting: DIP switch/ HART, mounting: DIN 35 rail

Isolating transformer, 2-channel, Input signal: 2 x 4-20 mA, Output signal: 2 x 4-20 mA (passive), Operating voltage: 15-35 V DC (loop powered), Connection: screw terminals, Mounting: DIN 35 rail, ATEX-approved

Supply isolator, 1-channel, Input signal: 4-20 mA, Output signal: 4-20 mA (active), Operating voltage: 24-31 V DC (-15/+10%), Interfaces: HART, Connection: screw terminals, Mounting: DIN 35 rail

Isolating transformer, 1-channel, Input signal: 4-20 mA, Output signal: 4-20 mA (passive), Operating voltage: 15-35 V DC (loop powered), Interfaces: HART, Connection: screw terminals, Mounting: DIN 35 rail, ATEX-approved

NAMUR isolating amplifier, 1-channel, change-over contact, input signal: < 1.2 mA blocking/> 2.1 mA conducting, output signal: relay contact (change-over contact), switching voltage/switching current maximum: 250 V DC/2A, connection: screw terminals, supply voltage: 24 V DC, setting: DIP switch, mounting: DIN 35 rail